Bohell TPLI18, Manual

Page: 17 / 36

POWER TOOL USE AND CARE
- Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
- Do not use the power tool if the switch does
not turn it on and off . Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
- Disconnect the plug from the power source
and/or battery pack, if detachable, from the
power tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
- Store idle power tool out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
- Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
- Use the power tool, accessories and tool
bits etc in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
- Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.
BATTERY TOOL USE AND CARE
- Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
- Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire .
- When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a connec-
tion from one terminal to another . Shorting
the battery terminals together may cause burns
or a fire.
-
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
- Do not use a battery pack or tool that is
damaged or modified .
Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130ºCmay cause explosion.
- Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increases the risk of fire.
-Remove the batteries from the appliance if you
are not going to use it for some time.
-Disconnect the battery charger from the mains
when not in use and before undertaking any
cleaning task.
-Do not open the battery/ies under any circum-
stances whatsoever.
-When the battery/ies is not in use, keep it away
from other metal objects like paper clips, coins,
keys, screws ... that could connect a terminal to
another.
-The battery/ies should be stored at a tempera-
ture of below 40ºC.
SERVICE
- Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
- Never service damaged battery packs .
Service of battery packs should be only be
performed by the manufacturer or authorized
service providers.
-Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DRILL SAFETY WARNINGS
- Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.