-Inspect the mounting screws: regularly inspect
all the mounting screws and ensure they are
firmly tightened. Should any screw be loose,
tighten it immediately. Failure to do so could put
you at serious risk.
CLEANING
-Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
-Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
-Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
-Never submerge the appliance in water or any
other liquid or place it under running water.
-If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance’s useful life
and could become unsafe to use.
SUPPLIES
-Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.)
for your appliance model.
ANOMALIES AND REPAIR
-Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
-If the connection to the mains has been dam-
aged, it must be replaced, take the appliance to
an authorised technical support service. Do not
attempt to disassemble or repair the appliance
by yourself in order to avoid a hazard.
SPECIFICATIONS:
Rated Power
300 W
Rated Voltage
230-240 V~
No load speed
15.000 – 22.000 rpm
Oscillation Angle
2,8 º
Weight
1,5 Kg
Sound pressure level
L
PA
= 86,2 dB
K
PA
= 3 dB
Sound power level
L
WA
= 97,2 dB
K
WA
= 3 dB
Vibration
< 3,772 m/s
2
-NB: These specifications are subject to change
without notice of purpose of improvement.
-NB: By virtue of the conditions of fabrication
of this product, the maximum used power can
differ from that specified.
-Measured sound level determined according EN
60745-1.
-The vibration emission level given in this infor-
mation sheet has been measured according
EN 60745-1 and may be used to compare one
tool with other. It may be used for a preliminary
assessment of exposure
-The vibration value during actual use of the
power tool can differ from the declared total val-
ue depending on the way in which tool is used
-It’s necessary identify safety measures to pro-
tect the operator that are based on an estima-
tion of exposure in the actual conditions of use
(taking account of all parts of the operating cy-
cle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
-The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
