0009 00
BOH-PM-13-2
Chapter 2 Rev. 0.01
0009 00-4
The jack device and main subassembly (1) is secured within the office module against the wall opposite
the desk by two wall brackets (2). These brackets include a spring-loaded knob (3) that secure to the
main subassembly by locking into two designated holes (4) in the side of the subassembly. The
subassembly can be removed from these brackets by a simple pull and twist of the knobs until they lock
in the out position (5).
Once the main jack subassembly, base assembly and hat assembly have been removed from their
storage locations, the complete jack assembly can be connected.
Pull, then twist
to lock out
