11
Digital Call Switch Management
You can assign digital call switches to ports on an ASB via the appliance’s
Configuration
Settings
tab. If an analog switch was configured as a station with a type of
Digital Call
Switch & Speaker
, it will also appear on the Configuration Settings/Digital Call Switch
Management page. (Refer to the Managing Stations and Zones section of the
E7000
Series System Administrator Guide
.)
Multicast #
Identifies the IP address, port number, cut level (vol
-
ume), and station list used for the multicast audio
stream of one (or more) zones.
The following parameters appear for each of the 24 ports associated with the Analog
Station Bridge.
Port Number
Shows the port number of the Analog Station Bridge.
Port Type
Shows the device type to which the port connects
(speaker only, analog call switch and speaker, or digital
call switch and speaker).
Account ID
Shows the SIP account (IP address) associated with the
device preceded by the extension of the device associ
-
ated with this port.
Local Port
Shows the port used for SIP.
Username
Shows the username or extension for the station associ
-
ated with the port.
Digital Call Switches
Shows by serial number the Digital Call Switch assigned
to the ASB port.
Table 6. Configuration Settings (Continued)
