9
Configuration Settings Tab Parameters
The way to configure Nyquist appliances is to obtain configuration settings from the
Nyquist server.
TFTP Server
Identifies the host name or IP address of the Trivial
File Transfer Protocol (TFTP) server.
The specified TFTP server can be used to automati
-
cally set this device’s
Configuration
settings via the
Get Configuration from Server
button.
If
TFTP Server from DHCP
(see below) is set to “Yes”,
this value will be auto-configured via DHCP option
66, assuming the DHCP server has been configured
to provide option 66. For details, see the documenta
-
tion for your DHCP server.
Note:
A TFTP server runs on the Nyquist server on
port 69 (the standard TFTP port) and the optional
Nyquist DHCP service automatically provides this
TFTP address via option 66.
If this value is unspecified, the
TFTP Server from
DHCP
will automatically be set to “Yes”, this field will
become read-only, and DHCP will be used to config
-
ure this setting. To change this value, the
TFTP Server
from DHCP
setting must be set to No, which makes
the field editable.
TFTP Server from DHCP
“Yes” means the device will use the DHCP option 66
value to retrieve an address for the TFTP Server from
DHCP.
“No” means the device will ignore the DHCP option
66 value and use the manually configured value of
the TFTP Server (see above).
DHCP Enabled
Indicates if the device is enabled to use DHCP to
retrieve its IP configuration.
Reboot Appliance
Indicates that this appliance should reboot when the
Save button is clicked.
Table 5, Network Settings (Continued)
