BOGE
base
control for scroll compressors
Page 17
Display and Operation
4.2
Description of the Displays and Navigation
means: p
max
= 10.0 bar
Upper target pressure value
(switch-off pressure p
max
)
●
Press the Info key
six times (from the
main display).
The "Upper target pressure value" dis-
play appears, indicated by a bar/psi at
the top edge of the display.
The seven-segment display shows the
set value for the network pressure.
If this is reached, the control switches
the compressor off automatically.
means: p
min
= 9.0 bar
Lower target pressure value
(switch-on pressure p
min
)
●
Press the Info key
seven times (from
the main display).
The "Lower target pressure value" dis-
play appears, indicated by a bar/psi at
the bottom edge of the display.
The seven-segment display shows the
set value for the network pressure.
If this is reached, the control switches
the compressor on automatically.
Activated simultaneously:
Indicator lamp – Fault (red)
Indicator lamp – Ready (green)
Function check of the dis-
play elements
●
Press the Info key
eight times (from the
main display).
All display elements that can be acti-
vated appear on the control unit at the
same time, and both indicator lamps
come on.
means software version 0001 (the first digit (4)
stands for scroll compressor software)
Software version
●
Press the Info key
nine times (from the
main display).
The "Software version" display appears.
The seven-segment display shows the
version number of the control software.
●
Press the Info key
again.
The main display appears again.
If no keys are pressed on the control unit for
five minutes, the main display appears automat-
ically.
Irrespective of the display that was last called up: If no keys are pressed on
the control unit for five minutes, the main display reappears automatically.