S-line
17
Wheel slip
The S2 Trail spreading system is operated by the left wheel of the spreader. In
case the ground is icy and the spreading material is compact
– wheel slip may
arise.
(The wheel slides on the ground.)
In such cases the following check and changes are recommended:
It must be ensured that no bigger foreign objects in the hopper are causing
blocking of the agitator.
Open the setting handle 100% (scale 9,0) so that possible compacted material
is loosened when driving.
Reduce the air pressure in the pulling tyre for better road grip.
Mounting of a Snow Sock on the pulling wheel (Snow Socks are optional
equipment)
Put spikes in the pulling wheel. (Spike tyre is optional equipment).
Engagement of the spreading system can, if necessary, be made at low speed
less than 5 km/h. Only recommended on icy roads.
Do not mount snow chains
Forward speed for S2 Trail
The spreader should not drive more than 25 Km/h.
Transport only with disengaged spreading system / agitator.
Pay attention to the fact that the S2 trail may ‘tilt’ if the hopper is full and the
machine is driving on a slope or in a sharp turn at speeds higher than 8 km/h.