3
2. Product Information
The Boekel series of Incubators are designed for laboratories and clinics that
require contemporary styling, accuracy and economy in a basic incubator package.
The incubator uses a dial controlled thermostat and has the added features of a
digital temperature display and a double walled chamber door. The incubator has
a chamber volume of 0.8 cu. ft. (0.02 cu.m) and a chamber temperature range of
a5
˚
C to 60
˚C. The incubator has a chamber uniformity of +/
- 1
˚
C at 37
˚
C
within the bounds of the shelf area.
3. Assembly
3.1 Unpacking
Remove packing materials carefully, and retain for future shipment or storage of
the unit. Inspect for damage. Report all shipping damage to the carrier
immediately. Shipping damage is covered by the carrier and repair/replacement
for shipping damages must be coordinated through the carrier. Complete and
return the Warranty Registration Card. Packs should contain:
•
133000 Incubator
•
Power Line Cord
•
Operating Instructions
•
Two Shelves
•
Eight Shelf Brackets
3.2
Installation
Place the Incubator on a flat and stable surface, preferably away from drafts.
Insure that the surface on which the unit is placed will withstand the radiated heat
produced by typical laboratory incubators. Fit the power line cord into the IEC
power socket on the rear of the unit. Plug power cord into a power supply that
matches the voltage listed on the serial number label on the rear of the unit.
Insert the wire rack shelves at the desired heights. Refer to the sketch below for
proper shelf bracket installation.
