8
STEP 03
1.
PUT 2” SQUARE END CAP(41) INTO BOTH SIDES OF TOP CROSS BEAM(12).
2.
ATTACH TOP CROSS BEAM (12) ONTO THE VERTICAL BEAM (10) AND FIX TIGHTLY
BY BOLTS(53) WASHER(68) AND NYLON NUTS(63). INSERT THE TOP SIDE OF GUIDE
RODS (02) INTO THE HOLE OF TOP CROSS BEAM(12). FASTEN TIGHTLY BY BOLTS
(54) AND WASHERS (68).
3.
SCREW THE RUBBER BUMPER (37) TO THE VERTICAL BEAM (10).
4.
ATTACH 2 PULLEY BLOCK (21) TO THE BOTH SIDES OF THE VERTICAL BEAM (10).
AND FIX TIGHTLY BY BOLTS (56) WASHERS(68) AND NYLON NUTS (63).
5.
INSTALL PRESS PIN TO THE VERTICAL BEAM (10). FIX TIGHTLY BY BOLTS (52)
WASHER (69) AND NYLON NUTS (64).
Summary of Contents for L700015
Page 4: ...4...
Page 5: ...5 13...
Page 13: ...13 24 1 24 2 24 3 24 4 25 5 24 5 25 1 25 2 25 3 25 4 25 6 26 1 26 3 26 2 26 5 26 4...
Page 14: ...BODYWORX BODYWORX...
