background image

 
 

 

4

2.

 

IMPORTANT SAFETY INSTRUCTIONS 

When using this product, basic precautions should always be followed, including the 

following: 

Please read the instruction carefully before starting to use this product. 

Danger

 – To reduce the risk of electric shock

 

1.

 

Always unplug this product from the electrical outlet immediately after using and before 
cleaning. 

Warning

 – To reduce the risk of burns, fire, electric shock, or physical injury

 

1.

 

The product should never be left unattended while plugged in. Unplug the product from the 
outlet when not in use. 

2.

 

Close supervision is necessary when this product is used by or near children, invalids, or 
disabled persons. 

3.

 

Be sure to use the product only for its intended use as described in this manual. Do not use any 
attachment not recommended by the manufacturer in order to avoid any danger or accidents. 

4.

 

Never operate the product if it has a damaged cord or plug, if it is not working properly, if it 
has been damaged, or dropped into water. Please return the product to the service center of 
seller for examination and repair. 

5.

 

Do not carry this product by the supply cord or use the cord as a handle. 

6.

 

Keep the cord away from hot surfaces or ground.   

7.

 

Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc. 

8.

 

Never drop or insert any objects into any openings.   

9.

 

Do not use or operate outdoors. 

10.

 

Do not operate where aerosol (spray) products are being used or where oxygen is thin. 

11.

 

Before turning the product power off, turn all controls to the off position then remove the plug 
from the outlet.   

12.

 

Connect the product to a properly grounded outlet only. 

13.

 

The product is only intended for household use. 

14.

 

If the power cord is damaged, be sure to ask the manufacturer for replacement to avoid 
accidents .The seller and correlative qualified professionals are as well as eligible.

Summary of Contents for JX324






















Reviews: