Bodyworx JX324, Manual

Page: 12 / 21

12
3. Press to start treadmill, the treadmill will start with a speed of 1.0km/hr, at this time press
、
to increase/ decrease speed( also can press fast speed buttons
、 、 、
to instantly choose the speed you need), press once to pause your workout( press one time,
all values stop to change, treadmill pause 4 minutes and back to START/ READY condition, after
press one time, then press the second time and hold the button for 3 seconds, treadmill will
automatically go back to the START/READY position.)
** Speed range
：
1~16 km/hr
，
Step is 0.2 km/hr.
II. MODE operation instruction (Under this mode total have MANUAL and 6 PROGRAM installed
program)
1. MANUAL
：
Under this mode, you can set up the time, distance as your need, operation method
are as below
：
1.1. Press , then see MANUAL LED light is linking, press to enter into the
MANUAL mode.
1.2. At this moment you can press
、
to set up time, after finished, you can
press directly to operate, or press to shift to distance.
Program pre-set values is 20 min
Time range
：
5~99 min
，
Step is 1 min.
1.3. At this time you can press
、
to set up distance, after finished, you can
press directly to operate, or press back to MODE option.
Program pre-set values is 5 km
Distance range
：
1~9.9 km
，
Step is 0.1 km.
2. PROGRAM
：
Under this mode, including P1~P6 total 6 modes, you can choose your favorite
mode, operation as following
：
2.1 Press , then see MANAUL LED light is blinking, you can press
、
to
choose P1~P6 any one of mode, then press to enter into the mode you choose,
2.2 After into the mode, you can see the LEVEL window begins to blink, under
PROGRAM mode, P1~P6 each mode have 3 LEVEL, you can choose your favorite
mode.