Step 5
1. Place seat (21) on seat post (9), secure with 4
washers (58) & bolts (47) tightly.
2. Place backrest (20) to seat post (9); secure with 4
washers (58) & bolts (46) tightly.
Step 6
1.
Release T knob (11) from fastener at seat post (9).
Open fastener and place handlebar (10) onto the
fastener.
2.
Select the desired position for handlebar (10), and
fasten the T knob (11) with sleeve (55). Ensure it is
tightened very well.
3.
Attach hand pulse sensor wire (upper) (17) to hand
pulse sensor wire (middle) (32) securely.
Step 7
1. Attach tension control (15) to handlebar post (5) by
bolt (57) & washer (61) securely.
2. Plug upper computer cable (13) to lower computer
cable (14), and connect hand pulse sensor wire
(lower) (64) with wire-A (65).
3. Insert handlebar post (5) into main frame (1), screw
with 3 bolts (46) & washers (58) firmly.
Step 8
1. Plug upper computer cable (13) to cable at back of
computer (12) securely. Attach computer (12) on
bracket at top of handlebar post (5) by 4 bolts (74).
2. Attach T bar (6) to handlebar post (5), screw with 2
bolts (49) & washers (60).
GB
GB
GB
GB
- 6 -
