![background image](http://html1.mh-extra.com/html/bodyworx/ac550m/ac550m_owners-manual_2783565014.webp)
13
BOTTON FUNCTION
OPERATION INSTRUCTION
1. When POWER ON, LCD will full display 2s (Figure 1) with long beep sound, then display
wheel diameter 1s in DIST area (Figure 2).
Figure 1
Figure 2
Figure 3
Figure 4
2. CLOCK setting
In CLOCK mode, HOUR is flashing in 1HZ, rotate the joggle wheel to adjust hour value
(Figure 3) and press [MODE] to confirm. The range is 0~23 hours. Then MINUTE is
flashing in 1HZ, rotate joggle wheel to adjust minute value (Figure 4), the range is 0~59
minutes. Press [MODE] to confirm.
3. G1 program
:
Without signal input (In Standby mode), STOP symbol is light up,G1 flash in 1HZ. Rotate
joggle button to select: G1
→
G2
→
G3
→
G4 (Figure 5), press [MODE] to enter selected
program. With RPM signal input, console will start to run directly.
3.1 In G1 (Manual) mode:
①
The number in TIME window is flashing in 1HZ, set time by joggle button(Figure 6), press
[MODE] to confirm the value and enter to next setting. After setting DISTANCE, CALORIES,
and PULSE Target, press [MODE] key to go to Standby mode. Press MODE again, you can
ITEM
DESCRIPTION
RECOVERY
With PULSE input, press [RECOVERY] to test heart rate recovery
status.
MODE
Confirm setting or selection.
JOGGLE
WHEEL
Use the joggle wheel to select an exercise program (G1~G4) and also
to set up value for TIME, DISTANCE, CALORIES and PULSE.
RESET
To clear settings of TIME, DISTANCE, CALORIES and PULSE.
Press and hold this key for 2 seconds to reboot the console.