10
STEP 3
Remove the clamp (32) and allen screw (16) from front post (13). Attach handlebar (14)
to front post (13) and tighten with clamp (32), allen screw (16), cover for clamp (31) and
T-type knob (30).
Insert
the
hand pulse wires (28) through the grommet (29) and pull out from top bracket.
Attach hand pulse wires (28) and sensor wire (25) to the computer (15) accordingly.
Tighten with four screws (20) which are pre-assembled on the back of computer.
STEP 4
Release the nuts under the seat (12), attach the seat to sliding tube (36) and tighten the
nuts. Remove the quick release knob (41) from the main frame (1). Insert seat post (11) into
main frame (1) through the
seat post cover (38). Line up the holes and secure seat in
position with quick release knob (41). The correct height for seat can be adjusted after the
bike is fully assembled.