Bodyworx ABX800, Manual

Page: 15 / 29

11
WARNING
Before assembling and using the exercise bike, carefully read the manual, warnings, cautions and
instructions associated with this product. Any failure to do so may result in injury or property damage.
Keep children and pets away from the product.
Ask your doctor for advice before starting the exercise program, especially if you are over 35 or have
health problems.
Make sure that all screws are properly tightened before use.
Maximum load capacity: 160 kg
SEAT HEIGHT ADJUSTMENT
For effective exercise it is important to set the correct saddle height. Your foot should be slightly bent
and relaxed when you step down.
If the foot is too stretched or user can’t reach the pedal, the seat must be lowered. If the legs are too
bent, the seat must be raised. Loosen the hand screw (76) and move the seat post (60). Adjust the
seat height (73) and secure with the hand screw (76).
Tighten the hand screw (76) properly before use.
12
SEAT POSITION
You can move the seat (73) forward or backward. By adjusting the seat, you exercise the different
muscles.
Lift the lever (62) and adjust the seat (73) to the desired position. Then release the lever (62) and lock
the seat (73) in the desired position.
HEART RATE
The exercise bike does not include a chest belt or other forms of heart rate transmission. However, it
is compatible with chest belts operating at 5 kHz.
The chest belt sends information to the console (85). In this way, you practice most effectively
because you have the required heart rate information for maximum training efficiency.
Follow the instructions attached to the purchased chest strap for pairing.
15