6
ASSEMBLY INSTRUCTION
STEP 1
：
Attach the front stabiliser (17) and the rear stabiliser (20) to the main frame (26) with bolt (9)
and washer (10); Attach the pedal (40L/R) to the crank arms as shown in FIG.1,
CAUTION:
be sure
the right pedal (40R) marked (R) is attached to the right crank arm and tightened in the clockwise
direction. The left pedal (40L) marked (L) is attached to the left crank arm and tightened in the
anticlockwise direction.
S15
9# M8*16 8PCS
10# d8*
Φ
20*1.5 8PCS
STEP 2:
Put the front plastic cover (23) to the support tube (15), then connect the sensor 16 & 25 and tension
control wire 12 & 24 as shown in FIG.3, and install the support tube (15) on the main frame (26) with
bolt (9) and washer (10).
9# M8*16 8PCS
10# d8*
Φ
20*1.5 8PCS
12
24
