IMPORTANT Note:
Keep the
Right/Left Pedal Hinge Bolt (#162/163)
and the
Wavy Washer (#86)
perfectly straight as they go through the
Pedal Connection Joint (#66A)
and the
Crankshaft (#27).
If the
Right/ Left Pedal Hinge Bolt (#162/163)
are
connected to the
Crankshaft (#27)
incorrectly, damage to
the
Right/ Left Pedal Hinge Bolt (#162/163)
and
Crankshaft (#27)
will occur.
Attach the
Pedal Connection Joint (#66A)
to the
Right Pedal Tube (#06R)
. Insert a
Hex Bolt (#05)
through the upper
bracket of the
Pedal Connection Joint (#66A)
, followed by
Right Pedal Tube (#06R)
then the lower bracket of the
Pedal
Connection Joint (#66A)
. Secure them with a
Nylon Nut (#45)
.
Attach three
Caps (#42)
on three
Hex Bolts (#05)
as illustrated in the drawing below.
Align and attach the
Pedal Connection Joint (#66A)
on the
Right Pedal Tube (#06R)
to the right
Crankshaft (#27)
. Insert
the
Right Pedal Hinge Bolt (#162)
through one
Wavy Washer (#86)
, followed by
Pedal Connection Joint (#66A)
and
Crankshaft (#27)
. Secure the
Right Pedal Hinge Bolt (#162)
tightly into the
Crankshaft (#27)
by turning CLOCKWISE.
Then, secure with a
Spring Washer (#51)
and a
Right Nylon Nut [with WHITE inner nylon ring] (#49)
.
Repeat the above process on the left side of the machine but turn the
Left Pedal Hinge Bolt (# 1 63)
COUNTER-CLOCKWISE.
A s s e m b l y S t e p 3
PLEASE NOTE: a):Turn
Left Pedal Hinge Bolt (#163)
COUNTERCLOCKWISE and the
Left Nylon Nut [with BLACK inner nylon ring] (#48)
CLOCKWISE to tighten.
PLEASE NOTE: a):Turn
Right Pedal Hinge Bolt (#162)
CLOCKWISE and the
Right Nylon Nut [with WHITE inner nylon ring] (#49)
COUNTERCLOCKWISE to tighten.
86
Remove
Hex Bolts (#05)
and
Nylon Nuts (#45)
that are pre-assembled on the
Pedal Connection Joint (#66A)
and set
them aside as they will be used in a later process.
RIGHT Side
Left Crankshaft
163
Right Crankshaft
86
86 162
48
162
Page 8
Assembly Instructions
BRD 2000/2080