Others
Hardware & Tool Required
A s s e m b l y S t e p 6
#41 Cap (S13)
[2 Pieces]
#17 Knob Bolt (M8x36 mm)
[2 Pieces]
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
Assembly Instructions
If you encounter too much friction, try using WD40
or Vaseline as a lubricant.
Insert the
Left Handlebar (#07L)
into the
Left Coupler
Bar (#04L)
to a height setting that is comfortable to the user.
You can always re-adjust the height setting after complete
assembly for a better fit. Secure together using one
Knob
Bolt (#17)
as shown below.
Attach one
Cap (#41)
over the end of the
Knob Bolt (#17)
as
illustrated below.
Making sure the settings for both Handlebars is the same,
repeat this process on the other side using
Right Handlebar
(#07R)
,
Right Coupler Bar (#04R)
, and one
Knob Bolt (#17)
Page 12
BRD 2000/2080