A s s e m b l y S t e p 8
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
Assembly Instructions
Page 14
Connect the pin on the tip of the
Sensor Wire (#26b)
to the corresponding socket of the wire end on the
Electronic
Monitor (#50)
as shown in diagram below. Attach the
Electronic Monitor (#50)
by sliding it in place onto the tip of the
ASSEMBLY IS NOW COMPLETE. HOWEVER, PLEASE READ ALL SAFETY GUIDELINES &
WARNING LABELS BEFORE USING THE UNIT TO AVOID SERIOUS INJURY.
Center Post (#77).
BRD 2000/2080