unknown. Such use may affect the aircraft’s instrumentation, communication, and performance,
may disrupt the network, and may be illegal.
Take off in posted facilities
Do not wear the SenseWear Armband in healthcare facilities or where any posted regulations
restrict you from doing so. Hospitals or healthcare facilities could be using equipment that is
sensitive to external RF energy.
Avoid explosive areas
Do not wear the SenseWear Armband if you are in any area that has a potentially explosive
atmosphere. Obey all signs and instructions.
Performance considerations
Crosstalk
The SenseWear Armband uses a non-coded mode of operation and can pick up RF (radio frequency)
transmitter signals within 3ft. (1m). Therefore make sure no other transmitter is within that range.
Non-coded signals from more than one transmitter picked up simultaneously can cause incorrect
data collection.
Interference: Other products affecting the SenseWear Armband
As with many electronic devices, because of the proliferation of radio-frequency transmitting
equipment and other sources of electrical noise (e.g., cellular phones, mobile two-way radios,
electrical appliances, electronic exercise equipment), it is possible that high levels of such
interference due to close proximity or strength of a source may result in disruption of performance
of this device.
Certifications
FCC statement
This device complies with Part 15 Subpart C and Subpart B, Class B of the FCC Rules. Operation is
subject to the following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
∙
Reorient or relocate the receiving antenna.
∙
Increase the separation between the equipment and receiver.
∙
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
∙
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
CAUTION: Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
ETL Listed
Conforms to UL Standard 1950, 3rd Edition/CSA C22.2 No. 950-95,
Safety of Information
Technology Equipment Including Electrical Business Equipment
.
