20
5.2 Connect Electrode Pads to Electrode Wires
Insert the electrode wires connector into the electrode connector.
Make sure they are properly connected to ensure good
performance. Please refer to the picture below.
5.2 Connect Electrode Wires to Device
Before proceeding to this step, ensure that the device is
completely switched OFF.
Hold the insulated portion of the electrode wire connector and
insert the plug into the receptacle on the top of the main device.
Ensure the electrode wires are inserted correctly. The device has
two output receptacles controlled by Channel A and Channel B
at the top of the unit. You may choose to use one channel with
one pair of electrode wires or both channels with two pairs
of electrode wires. Using both channels gives the user the
advantage of stimulating two different areas at the same time.
Caution
Caution
Always use the electrode pads that comply with the requirements
of the IEC/EN60601-1, ISO10993-1/-5/-10 and IEC/ EN60601-1-2,
as well as CE and FDA 510(K) regulation.
Do not insert the plug of the electrode wires into any AC power
supply socket.
5. OPERATING INSTRUCTION
