14
FXB10 Folding Bike
52L
64L
64L
76L
64R
76R
43L
43R
64R
52R
Tool:
13-15-19mm Wrench x 2pcs
Step 4:
1.
Remove the Left Nylon Nut (52L) and Right Nylon Nut (52R) from the Left Pedal (64L) and
Right Pedal (64R). secure the Left Pedal Strap (76L) onto the Left Pedal (64L) and the Right
Pedal Strap (76R) onto the Right Pedal (64R).
2.
Installment of the Left Pedal: Make sure that it is straight, insert the Left Pedal (64L) into the
threaded hole in the Left Crank (43L). Turn the pedal shaft of the Left Pedal (64L) by hand
in a counter-clockwise direction. Lightly screw on the Nylon Nut (52L) that was taken off
the Left Pedal (64L) onto the protruding pedal shaft in a clockwise direction. Finish off the
tightening of the Left Pedal (64L) with the 13-19mm Wrench. Once the Left Pedal (64L) has
been tightened, use the second 13-19mm Wrench to tighten the Left Nylon Nut (52L) by
turning the nut in a clockwise direction.
WARNING: Install the Left Pedal (64L) only with a counter –clockwise direction.
3.
.Installment of the Right Pedal: Repeat the same step from 4A and 4B for the Right Pedal
(64R) installation into the Right Crank (43R). However, turn the right pedal shaft clockwise
and nut counter-clockwise during installation. WARNING: Install the Right Pedal (64R) with
only with the clockwise direction. The Cranks, Pedals, Pedal shafts, and the Pedal Straps are
marked “R” for Right and “L” for Left. See the ADJUSTMENT pages, P.17 for instructions to
install and adjust the pedal straps. This machine is not intended to be pedaled in reverse.
Summary of Contents for CVEB2704
Page 2: ......
Page 30: ...30 FXB10 Folding Bike 9 4 Exploded drawing...
Page 32: ...FXB10 Folding Bike...
