STEP 1. Undo Packaging
This product is packaged in three separate boxes.
Please check that you have received all necessary parts.
• Main Box
: Back sheet, Head sheet, Seat cushion, Accessories (controller, cables, and manual)
• Arm / Shoulder Unit
• Leg Unit
STEP 2. Constructing the Leg Unit
01
With the controller, recline the chair to be parallel with the floor. Then, install the connector and air hose
pieces within the leg unit.
02
Connect the leg unit to the main body frame by aligning the parts as shown in the diagram below.
03
When all parts are aligned and in place, use the controller to lower the leg unit to its original resting
position.
Installation Part 01
Main Body
Main Body
Leg Unit
Leg Unit
Fasten the parts together using nails.
Summary of Contents for REX-L
Page 23: ...Memo...
