BodyCraft SW-95.0201, Assembly And Operating Instructions Manual

Page: 34 / 60

34
Galena
Step 10: Assembly of the Pads and Accessories
1. Attach one rectangular end plug (35) to the top of the chrome back adjuster (30a).
2. Mount the smaller press back pad (51) to the chrome back adjuster (30a) with two bolts (75) and
two washers (90).
3. Insert a roller bar (24) through the bottom of the chrome back adjuster (30a).
4. Moisten two covered foam pads (106) with water and slide them onto the roller bar (24).
5. Fix the covered foam pads (106) to the roller bar (24) with one screw (110), one washer (96c), one
plastic cover (109) and one plastic washer (108) each.
6. Slide the chrome back adjuster (30a) through the bracket on the press upright (3) and lock it in
place with the knob (41).
7. Attach one square end plug (32a) to the back of the chrome back adjuster (30a).
8. Mount the larger press seat pad (52) to the chrome seat adjuster (22) with two bolts (75) and
two washers (90).
9. Attach two rectangular end plugs (35) to the front and rear of the chrome seat adjuster (22).
10. Insert a roller bar (24) through the front of the chrome seat adjuster (22).
11. Moisten two covered foam pads (106) with water and slide them onto the roller bar (24).
12. Mount the covered foam pads (106) to the roller bar (24) with one screw (110), one washer (96c),
one plastic cover (109) and one plastic washer (108) each.
13. Insert a roller bar (24) through the front of the leg extension (23).
14. Moisten two covered foam pads (106) with water and slide them onto the roller bar (24).
15. Mount the covered foam pads (106) to the roller bar (24) with one screw (110), one washer (96c),
one plastic cover (109) and one plastic washer (108) each.
16. Slide the chrome seat adjuster (22) into the seat frame (21) and lock it in place with the knob
(41).
17. Mount the larger pec dec back pad (53) to the pec dec upright (2) with two bolts (77) and two
washers (90).
18. Mount the smaller pec dec seat pad (54) to the pec dec seat bar (19) with two bolts (77) and two
washers (90).
19. The interchangeable accessories (26, 61, 63, 25) can be attached to the different cable ends with
a hook (43) and/or chain (44) as shown in the drawings.