BodyCraft R1000G, Owner'S Manual

Page: 10 / 27

9
A
SSEMBLY
I
NSTRUCTIONS ”
S
TEP 7
–
Connection Wire
and Console
Assembly
NOTE:
The console inside
has battery wire, be sure to
open the battery cover to
connect the battery wires
correctly, then assemble the
console cover back.
a. Plug
the
Console Wire
into the
Middle
Connection Wire (130).
b. Plug the
Console Wire
into the
Pulse Sensor
Wire 2 (134). NOTE:
Be
careful not to pinch the
wires; make sure each
console wire pin matches
correctly to each item
wire pin.
c. Place the
Console (30)
onto the
Upright Post (8)
and fully secure with 4pcs
Bolts, Round Head (M5xp0.8x15mm)(99)
.
S
TEP 8
–
Console Bracket Assembly
Attach the
Front Console Bracket (152)
and the
Back Console Bracket (153)
to the
Upright Post Assembly (8)
and
fully secure with 4pcs
Self-Tapping Screws, Truss Head (M4x20mm)(97)
and 1pcs
Bolt, Round Head
(M5xp0.8x15mm)(99)
.
S
TEP 9
–
Pad Adjustment Lever Assembly
a. Refer to
FIG. 2
, 1pcs
Bolt, Socket Head (M5×p0.8×15mm)(161)
and
1pcs
Lock Washer (M5)(155)
already pre-attached to the second screw hole of the
Pad Adjustment Lever (75)
.
b. Remove 1pcs
Bolt, Socket Head (M5×p0.8×15mm)(161)
and
1pcs Lock
Washer (M5)(155)
from the second screw hole of the
Pad Adjustment Lever
(75)
.
c. Follow
FIG.2’s arrow
to gently move the
Pad Adjustment Lever (75)
outward
until it aligns with the first screw hole as the drawing shown on the right, then fully
tighten with 1pcs
Bolt, Socket Head (M5×p0.8×15mm)(161)
and
1pcs Lock
Washer (M5)(155)
.
d. Continue fully tighten 1pcs
Bolts, Socket Head (M5×p0.8×15mm)(161)
and
1pcs Lock Washer (M5)(155)
that already pre-attached on the first screw hole
of the
Pad Adjustment Lever(75)
.
S
TEP 10
–
Adjustment Lever Assembly
NOTE:
For shipping purpose, each
Adjustment Lever
has pre-assembled one pcs
Nut (M8)(122)
as the
illustration shown on the left.
a. Attach each one
Adjusting Handle (39)
to two
Adjustment Levers
to the proper desired
position.
b. To fully secure the
Adjusting Handle (39)
by rotating the
Nut (M8)(122)
in
counter-clockwise direction until completely reach to the
Adjusting Handle (39)
.
Fully Tighten