5
STEP 1 ASSEMBLE MAIN UPRIGHT
50
50
61
61
50
48
61
64
64
61
8
48
34
34
85
85
85
85
61
48
48
61
61
61
35
61
61
64
64
61
7
1R
2L
1. Lift Right Main Upright (1R)
and Left Main Upright (2L)
and attach the Mid Cross
Connector (8) to both using
four 3/8" X 2-1/2" Hex Bolts
(48), eight 3/8" Washers
(61), and four 3/8" Nylon
Nuts (64). Remember to
only hand tighten bolts until
finishing the next step.
2. Attach the Chin Up Bar (7)
using four 3/8" Washers
(61) and four 3/8" X 3/4"'
Round Set Screws (50).
Make sure that
Uprights are stable
and balanced before
letting go. Tighten all bolts.
3. Attach the Back Support
Plate (70)
using
six 1/4" X
3/4" Set
Screws (85).
Assembly requires two
people. Do NOT attempt
assembly by yourself.
Carefully unpack the pieces
and lay them on the floor
near the location you plane
to use this machine.
Professional installers are
highly recommended. To
ease assembly, DO NOT
tighten any bolts until
instructed.
85
70
35
34
34
85
4. Cap four 50 X 100mm Oval Plugs (34) to each
bottom end of Right & Left Main Upright (1R & 2L)
and two 40 X 80mm Oval Plugs (35) to each top
end of Right & Left Main Upright (1R & 2L).