6
STEP 2 ASSEMBLE GUIDE ROD AND WEIGHT PLATE
52
52
12
18
61
61
50
64
61
64
19
20
21
3
37
30
51
59
2L
59
9
1. Remove pre-assembled Top Guide Rod Holder (9). With two Guide Rods (3) angled slightly
forward, slide 10 each 10 lbs Weight Plates (21), then 10 each 5 lbs Weight Plates (20) onto the
Guide Rods (3). Make certain that each plate is oriented with the concave surface facing inside.
2. Attach Pulley Block (12) to the Top Plate (18) using two 3/8" X 1" Inner Hex Screws (52), two 3/8"
Washers (61), and two 3/8" Nylon Nuts (64).
3. Attach the Top Plate (18) to the Selector Rod (19) using the Top Plate Bolt (51). Slide the Top Plate
(18) and Selector Rod (19) onto the Guide Rods (3).
4. Attach Top Guide Rod Holder (9) to the top end of Guide Rods (3) using two 5/16" X 1/4" Set
Screws (59), and return the Guide Rods (3) to the upright position. Secure the Guide Rods (3) to
the top of the Left Main Upright (2L), using two 3/8" X 3/4" Round Set Screws (50) and two 3/8"
Washers (61).
5. Repeat the procedure for the right
side.
37
