STEP 9 Shroud and Poster Plate Assembly
113
113
113
113
113
113
113
113
124
124
124
124
41
41
40
40
42
5
3
6
13
1
39
43
17
44
44
45
45
45A
124
124
124
117
117
117
124
124
124
124
14
1. Attach the two Shrouds (40) to the Base Frame (1) and Top Guide Rod Retainer (13) using four 5/16" X 1/2" Hex Bolts (113)
and four 5/16" Washers (124) on each.
2. Attach the Poster Plate (39) to the Bench Press Upright (5) using three 5/16" X 5/8" Inner Screws (117) and three 5/16"
Washers (124).
3. Trim the Shrouds (40) and Poster Plate (39) with the provided Plastic Trim (41 & 42). You may need to cut the trim to proper
length.
Now tighten all bolts. First, tighten the bolts at the base of the Rear
Upright, where it attaches to the Rear Stabilizer. Then tighten all
bolts, working your way from the base of the gym to the top of
the gym.
Check to ensure all bolts are tight, all cables are
tight and cables are seated into the pulley grooves.
