STEP 4 BENCH PRESS ASSEMBLY
14
64
12
77
15
50
50
33
33
140
141
10
1. Attach Press Arm Selector (12) to Top Frame - bearing pre-installed (10) by aligning holes and
inserting 1" Pivot Axle (33). Lock into place with pre-installed set screw.
2. Attach Press Arm (15) to Press Arm Selector (12) by aligning holes and inserting 1" Pivot Axle
(33), 19.95mm Axle (33A). Lock into place with pre-installed set screw. Attach 50mm SQ. Plugs
(64) onto top ends Press Arm Selector (12) and two Press Arm Plugs (50) onto ends of Press
Arm (15).
3. Check Longer Pop Pin (77) into Press Arm Selector (12), making sure Pop Pin (77) seats into
adjustment holes in Press Arm (15).
