Strength Maintenance - Lubrication
26
L
UBRICATION
M
AINTENANCE
Lubrication
Bearing and linear bearing systems have advanced over the years, but they must be
maintained on a regular basis if you expect them to last and perform efficiently. BODYCRAFT
uses only the highest quality bearings and linear motion components that are virtually
trouble-free but they require the regular preventive maintenance to ensure long- lasting
performance.
1. Bronze bushings:
Recommend on a yearly basis to spray a Teflon-base lubricant
(silicone-free) directly onto the shaft as it passes through these bushings. Spray a
small amount onto the shaft and rotate it through its complete movement and wipe
off any excess.
2. Weight stack guide rods:
Use Silicone Spray lubricant and this time spray onto a
rag and wipe the guide rods down with this rag on a weekly basis. DO NOT use
WD-40 or other lubricants as they attract dirt and will create a mess between the
weight plates and bushings.
3. Sealed bearings pivot points:
As the name implies, they are protected from the
outside environment and require no lubrication. During the machine wipe down, wipe
the external bearing surfaces with the damp rag and dry to prevent the build up of
dust and sweat.
4. Linear bearing systems (if equipped):
These are precision, high load components
that require regular maintenance. Dirt and corrosion are the major culprits in linear
bearing failure. The hardened shafts must be wiped down monthly and lubricated
with a light layer of Teflon grease. We recommend a Teflon-based (silicone-free)
gel/grease for this purpose. Lack of care and maintenance will result in corrosion of
the linear shaft causing the bearings to become clogged and jammed.
If you perform the maintenance procedures, you will increase the life of the machine and
ultimately lower your maintenance costs with fewer replaced components and downtime.
Summary of Contents for F760 PRO
Page 30: ......