Product Assembly - F760 PRO - STEP 2a, 2b
14
Please Hand Tighten All Bolts Until STEP 3c
S
TEP 2b:
Installation of the Weight Holder
Attach the
Weight Plate Holder - Assembly
(10-ASM)
to the Frame, Main Assembly (1-ASM)
on the bottom side, lower cross frame, Moving
Carriage (23) & the Weight Holder Support (12)
using:
●
Two WASHERS, Flat 1/2" (70)
●
Two NUTS, Nylon Lock 1/2" (75)
3/4 SOCKET &
6” EXTENSION
Recommended Tools
3/4 WRENCH
S
TEP 2a:
Installation of the Weight Horn Support
Attach the
Weight Holder Support (12)
to the Frame,
Main Assembly (1-ASM) on the bottom side, upper cross
frame, Moving Carriage (23) using:
To the Main Frame Assembly (1-ASM)
●
Two WASHERS, Flat 1/2" (70)
●
Two NUTS, Nylon Lock 1/2" (75)
To the Weight Holder Support (12)
●
Two BOLTS, Hex 1/2“ x 3-1/4“ (58)
●
Three WASHERS, Flat 1/2" (70)
●
One WASHER, Spring 1/2" (74)
●
One NUT, Nylon Lock 1/2" (75)
NOTE:
Bottom Bolt #58 uses
the Spring Washer and the
Flat Washer when NOT using
the Nylon Locking Nut.
23
23
Summary of Contents for F760 PRO
Page 30: ......