Product Assembly - F760 PRO - STEP 4c, 4d
17
S
TEP 4c:
Installation of the Leg Press Assembly
Attach the
Plate, Leg Press (7)
to the Frame, Main - Assembly (1-ASM) with the Axle, Short (31), then
lock in with the Pull-Pin #1 (32). Continue with installation of the Pad, Back (18) to the Plate, Leg Press
Assembly (7-ASM). Finish with the Plug, Round 25mm (36) on the right & left bottom sides on the Plate,
Leg Press Assembly. Use the following hardware:
ALLEN WRENCH
7/32
Recommended Tool
Second:
Back Pad to the Leg Press Assembly
●
Two BOLTS, Hex Recessed Countersunk
Head 3/8″ x 1" (77)
S
TEP 4d: “
Torque Time”
●
Nuts, Nylon Lock 3/8” (76) to
15 ft-lbs +/- 2 lb.
●
BOLTS, Hex Countersunk Head
3/8” (64) to
8 ft-lbs +/- 1 lbs.
First:
Leg Press to the Main Frame Assembly
●
Two WASHERS, Flat 3/8" (69)
●
Two NUTS, Nylon Lock 3/8" (76)
9/16 SOCKET &
6” EXTENSION
Recommended Tools
9/16 WRENCH
NOTE:
The Long Axle (27) & Short Axle (31) are pre-assembled in the Main Frame Assembly (1-ASM).
Take both out to start STEP 4a and STEP 4c by using a 9/16 wrench or socket on the Nuts (76).
**
Gently tap out the Axle with the Nut
or
with block of wood on the end, so not to damage the treads.
**
Summary of Contents for F760 PRO
Page 30: ......