BodyCraft BC-F438, Assembly Instructions Manual

Page: 15 / 36

15
Step 3: Assemble the connector rear top frame
1. Place two 45 X 75mm End Caps (235) on the ends of the Connector Rear Stabilizer (201) and
mount the Connector Rear Stabilizer (201) to the Rear Stabilizer (1) using two 1/2” X 3-3/4” Hex
Bolts (255) and two 1/2” Larger Washers (266)
2. Mount the Left & Right Top Cable Connector (208L & 209R) to the Connector Rear Top Frame
(202) using a total of four 1/2” X 4” Hex Bolts (254), eight 1/2” Larger Washers (266) and four 1/2”
Nylon Nuts (268).
3. Mount the Connector Rear Top Frame (202) to the rear uprights using a total of four 1/2” X 3” Hex
Bolts (256), eight 1/2” Larger Washers (266) and four 1/2” Nylon Nuts (268).
4. Mount the Connector Rear Top Frame (202) along with the Hook Plate (272) to the Connector
Top Frame (203) using two 1/2” X 3” Hex Bolts (256), four 1/2” Larger Washers (266) and two 1/2”
Nylon Nuts (268).
5. Tighten all bolts and nuts.