Customer Service 1-888-707-1880
Or email [email protected] 7 Maurice Pincoffs Canada Inc.©2011
STEP 3
1. Pull the quick release knob (7) out and insert the handlebar post (17) to the Main frame. Release
the quick release knob (7) so that it slides into the opening of the main frame at your desired
location. Turn the quick release knob (7) clockwise to tighten securely.
2. Attach the computer holder (64) and handlebar (18) to the handlebar post (17). Secure using four
allen screws (20) and four spring washers (19).
Note: Secure the top two screws loosely, then lift
the handlebar to secure the bottom two screws. Once all four screws are attached you can
tightened them securely.
3. Insert the computer (65) onto the computer holder (64).
4.
Connect the sensor wire (72) to the wire at the back of the computer. See inset
.
STEP 4
Attach the left pedal (1L) to the left crank arm (33).
Attach the right pedal (1R) to the right crank (51).
Note: the right pedal should be threaded on clockwise and the left pedal on counter-clockwise.
