manualshive.com logo in svg

Body Solid GLPH1100, Assembly Instructions & Owner'S Manual

Share
Download
Body Solid GLPH1100 Assembly Instructions & Owner'S Manual Download Page 9

   

9

A s s e m b l y   I n s t r u c t i o n s

Assembly of the GLPH1100 takes professional installers about 2 hours to complete. If this is the first 
time you have assembled this type of equipment, plan on significantly more time.

Professional installers are highly recommended!

However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequen-
tially, the process will take time, but is fairly easy.

Assembly Tips

Read all “Notes” on each page before beginning each 

step.

While you may be able to assemble the GLPH1100 using 

the illustrations only, important safety notes and other 

tips are included in the text.

Some pieces may have extra holes that you will not use. 

Use only those holes indicated in the instructions and 

illustrations.

Do not fully tighten bolts until instructed to do so.

NOTE:

 

After assembly, you should check all functions

 

to ensure correct operation. If you experience

 

problems, first recheck the assembly instructions

 

to locate any possible errors made during assembly.

 

If you are unable to correct the problem, call the

 

dealer from whom you purchased the machine or

 

call 1-800-556-3113 for the dealer nearest you.

IMPORTANT!

Before you begin you should look at the quick reference 

guide that shows all hardware parts (in actual size) along 

with the corresponding key numbers on the assembly 

instructions.

NOTE:   To find out the length of a particular bolt, 

 

measure  its shank (the long, narrow part

 

beneath the head). Refer to the following

 

diagram:

Summary of Contents for GLPH1100






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands