16
S T E P
4
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Tighten all hardware at the end of this step.
A.
Connect Foot Plate (S) to Left Stabilizer Frame (D) and Right Stabilizer Frame (C) and secure
using:
Two 3 (M12x90 hex head bolt)
Four 21 (M12x25 washer)
Two 18 (M12 nylon lock nut)
B.
Connect Foot Plate (S) to Selector Insert Frame (N) and secure using:
One 3 (M12x90 hex head bolt)
Two 21 (M12x25 washer)
One 18 (M12 nylon lock nut)
C.
Insert two Round End Caps (37) into the ends of Right Adjustment Bar (L) and two Round
End Caps (37) to the ends of Left Adjustment Bar (M).
D.
Insert four Round End Caps (33) into Right Adjustment Bar (L) and four Round End Caps (33)
into Left Adjustment Bar (M) as shown.
E.
Slide the short end of Right Adjustment Bar (L) into the round insert bracket on Right Glide
Frame (F) as shown in the diagram.
NOTE:
A detailed view of the long and short Adjustment Bar ends are shown in the figure on
the next page.
F.
Insert the long end of Right Adjustment Bar (L) into Slide Tube (P) then secure Slide Tube (P)
onto Right Glide Frame (F) using:
Two 8 (M8x20 hex head bolt)
Four 25 (M8 washer)
Two 20 (M8 nylon lock nut)
G.
Slide the short end of Left Adjustment Bar (M) into the round insert bracket on Left Glide Frame
(G).
NOTE:
A detailed view of the long and short Adjustment Bar ends are shown in the figure on
the next page.
H.
Insert the long end of Left Adjustment Bar (M) into Slide Tube (P) then secure Slide Tube (P)
onto Left Glide Frame (G) using:
Two 8 (M8x20 hex head bolt)
Four 25 (M8 washer)
Two 20 (M8 nylon lock nut)
Summary of Contents for GLPH1100
Page 38: ...38 ...