manualshive.com logo in svg

Body Solid GLPH1100, Assembly Instructions & Owner'S Manual

Share
Download
Body Solid GLPH1100 Assembly Instructions & Owner'S Manual Download Page 5

   

5

B e f o r e   Y o u   B e g i n

Thank you for purchasing the GLPH1100. This gym is part of the Body-Solid line of quality strength 

training machines, which let you target specific muscle groups to achieve better muscle tone and 

overall body conditioning. To maximize your use of the equipment please study this Owner’s Man-

ual thoroughly.

Unpacking the Equipment

The GLPH1100 is carefully tested and inspected before

shipment. Body-Solid ships the unit in several pieces that 

require assembly. Ask for assistance during the assembly 

process.

Carefully unpack the boxes and lay the pieces on the 

floor near the area where you plan to use the equipment.

Be careful to assemble all components in the 

sequence presented in this guide.

If any items are missing, contact the dealer from whom

you purchased the unit or call 1-800-556-3113 for the 

dealer nearest you.

Body-Solid continually seeks ways to improve the performance, specifications and product manuals in order to ensure that only 
superior products are released from our factories. Please take the time to carefully read through this manual thoroughly. Instructions 
contained in this document are not intended to cover all details or variations possible with Body-Solid equipment, or to cover every 
contingency that may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment. Even 
though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any errors 
in, or omission from, the information given. Should additional information be required, or should situations arise that are not covered 
by this manual, the matter should be directed to your local Body-Solid representative, or the Service Department at Body-Solid Inc. 
in Forest Park, Illinois.

Any Questions?

 Call  (800) 556-3113

Summary of Contents for GLPH1100






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands