Computer Operation
RD3788
B
Page 16
FUNCTION MARK:
1. Lift off the battery cover and place two SIZE-AAA batteries into the
battery housing on back of monitor with the +/- sides installed correctly.
2. Please ensure batteries are correctly positioned and battery springs are in proper
contact with batteries.
3. Replace battery cover and ensure it is tightly closed.
4. Battery life is approx. 1 year under normal usage.
5. If the display is illegible or only partial segments appear, remove batteries and wait
15 seconds before reinstalling.
6. Removing the batteries will erase the computer memory and any data (including odometer).
*NOTE: Please refer to our “TROUBLESHOOTING” page (Pg. 18) in this manual if you have
any trouble with the LCD Computer Monitor or Pulse/Recovery Functions.
FUNCTIONS AND OPERATIONS:
Mode or function: Explanation:
Auto On/Off & Auto As long as the machine is in motion, the monitor will
Start/Stop remain on. If the machine is not in use and/or not in
motion for over 4 minutes, the monitor will turn off and
reset all function values to zero.
Auto Scan
monitor will rotate through all 5 functions: Speed, Distance,
Time, Odometer & Calories. Each function will display for 6
seconds.
Speed Press the button until the ARROW points to “SPEED” to display
the current speed.
Trip Distance Press the button until the ARROW points to “DISTANCE” to display
the trip distance you are traveling.
Elapsed Time Press the button until the ARROW points to “TIME” to display
the elapsed time.
Total Distance Press the button until the ARROW points to “ODOMETER” to
(Odometer) display the total accumulated distance.
Press the button until the ARROW points to “SCAN”, the
-Scan: Auto Scan - Odometer: Total Accumulated Distance
-Speed: Current Speed - Calories: Calories Burned
-Distance: Distance Traveled
-Time: Elapsed Time
BATTERY INSTALLATION/REPLACEMENT:
0:00
TIME
ODOMETER
CALORIES
PULSE
DISTANCE
SPEED
SCAN
- Pulse: Heart Rate
