BRD3788
Page 12
A s s e m b l y S t e p 7
Secure the
Center Post (#77)
to the
Main Frame (#01)
by using the previously removed two
Bolts (#76).
Connect the
Sensor Wire (#26b)
to the
Sensor Wire
(#26a)
as detailed in the close-up diagram.
Attach the
Water Bottle Holder (#94)
to the
Center
Post (#77)
by using two
Screws (#91)
and two
Washers
(#92).
Bolt
#85 Tool 4 (S6)
[1 Piece]
Hardware & Tool Required
Washer
Tools
#70 Tool 3 (S13-14-15)
[1 Piece]
#76 Bolt (M8x30 mm)
[2 Pieces]
#91 Screw (M4x8xΦ6 mm)
[2 Pieces]
#92 Washer
(d4xΦ12x1 mm)
[2 Pieces]
Remove the
Bolts (#76)
that are pre-assembled on the
Main Frame (#01).
Remove the
Screws (#91)
and
Washers (#92)
that pre assembled on the
Center Post
(#77).
Set them aside as they will be used later
in this step.
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
#42 WASHER FOR M10 BOLT,T2.0 1PC
Assembly Instructions