background image

BR1970 BR1958

Page  2

Before you undertake any exercise program, please be sure to 

consult with your doctor.

Frequent strenuous exercise should be approved by your  

doctor and proper use of your product is essential.  

Excessive or incorrect training may result to health injuries.  

Please read this manual carefully before commencing the 

assembly of your product or starting to exercise.

• 

Please keep all children away from this item when in use. 

Do not allow children to climb or play on this item when it 

is not in use.

• 

Supervise teenagers while they use this unit.

• 

For your own safety, always ensure that there is at least 

3 feet of free space in all directions around your product 

while you are exercising.

• 

Regularly check to see that all nuts, bolts and fittings are 

securely tightened. Periodically check all moving parts for  

obvious signs of wear or damage.

• 

Any adjustment devices that could interfere with the user’s  

movement on this unit should not be left projecting.

• 

Clean only with a damp cloth, do not use  solvent  

cleaners. Lubricate the moving parts of your unit every 30 

days with a silicone-based grease or product. 

If you are in any doubt, do not use your product; contact  

CUSTOMER SUPPORT.

• 

Before use, always ensure that your product is positioned 

on a solid, hard-flat surface.

• 

Do not place on carpet. If necessary, use a rubber mat  

underneath to reduce the possibility of slipping.

• 

Always wear appropriate clothing and footwear such as 

training shoes when exercising. Do not wear loose clothing 

that could become caught in moving parts during exercise.

• 

Do not use this unit if it is not functioning properly or if it is 

not fully assembled.

• 

Do not use this unit for commercial purposes. This unit is 

for home use only.

• 

Before use, you must read and understand all instructions 

& warnings stated in this Owner’s Manual as well as post-

ed on the equipment.

• 

It is the facility owner’s responsibility to properly instruct 

users on the proper operation of the equipment and to 

warn them of the potential hazards.

• 

If at any time during exercise you feel faint, dizzy or  

experience pain, stop and consult your physician.

Your product is intended for use in clean dry conditions. You 

should avoid storage in excessively cold or damp places as 

this may lead to corrosion and other related problems.

If you have any questions concerning the assembly of your 

item or if any parts are missing, please 

DO NOT RETURN 

THE ITEM TO THE STORE OR CONTACT THE  

RETAILER.  

 

Our dedicated customer service staff can help you with 

 

any questions you may have regarding the assembly of this 

unit and can also mail you replacement parts.

Customer Support is open 9:00 a.m. to 5:00 p.m. (Pacific 

Time) Monday through Friday.

 

Please contact us by any of the following means :

 

Body Flex Sports, Inc.

21717 Ferrero Parkway, Walnut, CA 91789

Telephone: 1 (888) 266 - 6789

Fax: 1 (909) 598 - 6707

Email: [email protected]

Body Flex Sports warrants your product for a period of  

1 year for the frame and 90 days on all parts if the item is used 

for the intended purpose, properly maintained and not used 

commercially.  

Any alterations or incorrect assembly of the product will void 

this warranty.

Proof of purchase must be presented for any warranty vali-

dation (no exceptions). This warranty applies to the original 

purchaser only and is not transferable.

This warranty does not cover abuse or defects caused during 

use, storage or assembly. During the warranty period, Body 

Flex Sports reserves the right to:

1. 

provide replacement parts to the purchaser in an effort to 

repair the item.

2.  repair the product returned to our warehouse (at the  

purchaser’s cost).

3.  replace the product if neither of the two previously  

mentioned actions effect repair. This warranty does not 

cover normal wear and tear on upholstery.

- Ruler with both Metric and English measurements

- 2 x Adjustable Wrenches

- 1 x Philips (”Crosshead”) Screw Driver

Your product is suitable for users weighing :  

250 pounds or less

General Information

Safety

Storage and Use

Questions

Customer Support

Warranty

Assembling Tools

Weight Limit

Summary of Contents for BR1958





















Reviews: