BR1970 BR1958
Page 10
Assembly STEP 6
Connect the pin on the tip of the Monitor Wire
(#26)
to the
corresponding socket of the wire end on the Electronic
Monitor
(#11)
as shown in diagram below.
Attach the Electronic Monitor
(#11)
by sliding it in place
onto the tip of the Main Frame
(#01)
.
NO hardware required
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any safety/warning labels affixed to the product before use.
For your safety , please visually and functionally inspect and test the unit after assembly is complete.
Hardware Required
