background image

 

© 2009 Water, Inc. 

WI-925 Rev. 12-09  

 

 

 

LIMITED WARRANTY

 

 
Subject to the conditions and limitations described below, Water, Inc. warrants its Model BG-PURE Reverse Osmosis 
Drinking Water Treatment System (excluding membrane, cartridge filters and battery), when installed in accordance with 
Water, Inc. specifications, to be free from defects in materials and workmanship under normal use within the operating 
specifications for a period of two (2) years from the date of purchase.  Water, Inc. also warrants the Smartap

®

 Water Quality 

Monitor to be free from defects in materials and workmanship under normal use within the operating specifications for a 
period of five (5) years from the date of purchase.  This warranty shall apply to the original end-user of the system only. 
 
Other than the membrane, cartridge filters and battery, any part found defective within the terms of this warranty will be 
repaired or replaced by Water, Inc. If any part is found defective, Water, Inc. also reserves the right to replace the drinking 
water appliance with a comparable Water, Inc. drinking water system of equal or greater quality. You pay only freight for 
repaired or replaced parts from our factory and local dealer charges, including but not limited to labor charges, travel and 
transportation expenses and handling fees. 
 
This warranty shall not apply to any part damaged by accident, fire, flood, freezing, act of God, bacterial attack (non-potable 
water), membrane fouling and/or scaling, sediment, misuse, misapplication, neglect, alteration, installation, or operation 
contrary to our printed instructions, or by the use of accessories or components which do not meet Water, Inc. specifications. 
If the drinking water system is altered by anyone other than Water, Inc. the warranty shall be void. 
 
ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THE PERIOD SPECIFIED ABOVE FOR 
THE PARTS DESCRIBED IN THIS LIMITED WARRANTY. 
 
Water, Inc. does not know the characteristics of your water supply. The quality of water supplies may vary seasonably or 
over a period of time. Your water usage may vary as well. Water characteristics can also change if the drinking water 
appliance is moved to a new location.  For these reasons, we assume no liability for the determination of the proper 
equipment necessary to meet your requirements, and we do not authorize others to assume such obligation for us.  Further, 
we assume no liability and extend no warranties, expressed or implied, for the use of this product with a non-potable water 
source or a water source which does not meet the conditions for use as described in this Owner’s Guide. 
 
WATER, INC.’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED TO THE REPAIR OR REPLACEMENT OF THE 
FAILED PARTS OF THE DRINKING WATER SYSTEM, AND WE ASSUME NO LIABILITY WHATSOEVER FOR DIRECT, 
INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, GENERAL OR OTHER DAMAGES, WHETHER FROM 
CORROSION OR OTHER CAUSES. 
 
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. 
Similarly, some states do not allow the exclusion of incidental or consequential damage, so the above limitation or exclusion 
may not apply to you.  This warranty gives you specific legal rights, and you may have other rights that vary from state to 
state.

 

 
 

 
 

 

 

 

 

 

Distributed Internationally by: 
 
 
 
 
 

1-800-322-WATER (9283) 

 

Register your product online 

at: www.waterinc.com 

For parts and service, contact: 

 

Water, Inc. Service Department: 

 

1-800-322-WATER (9283) 

 

Extensions 115 or 132 

 

Summary of Contents for BG-Pure




















Reviews: