Hardware Required
Assembly Step 4
With the help of an assistant, attach the
Left Upper Handle Bar
(#11)
to the left side of the
Top Upright (#01)
. Secure them together
using one
Reinforcement Plate (#16)
, one
Hex Bolt (#19)
, one
Hex Bolt (#17)
and one
Nylon Nut (#23).
Page 9
Assembly Instructions
Attach the
Sling Strap (#31)
to the
Left Upper Handle Bar (#11)
with a
Hook (#25)
.
Repeat this process on the opposite side.
Attach the
Hand Grip (#32)
to the Left
VKR Handle Bar (#08)
with a
Hook (#25)
.
Repeat this process on the opposite side.
PT817 / PT890
BOLT
#17. Hex Bolt (M10x25 mm)
[2 pieces]
#19. Hex Bolt (M10x70 mm)
[2 pieces]
#23. Nylon Nut (M10)
[2 pieces]
Nut
LEFT
RIGHT
The assembly process is now complete.
However
, for your own safety,
please make sure to read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any safety/warning labels
affixed to the product before use.
For your safety, please visually and functionally inspect and test the unit
after assembly is complete.
