BRT1875 BRT2885
Page 7
Assembly STEP 1
REAR STABILIZER ASSEMBLY
Secure the Rear Stabilizer
(#18)
to the Main Frame
(#01)
using two Carriage Bolts
(#30)
followed by two Arc Washers
(#39)
, two Spring Washers
(#38)
, and two Cap Nuts
(#43)
.
FRONT STABILIZER ASSEMBLY
Secure the Front Stabilizer
(#17)
to the Main Frame
(#01)
using two Carriage Bolts
(#30)
followed by two Arc Washers
(#39)
, two Spring Washers
(#38)
, and two Cap Nuts
(#43)
.
Note:
Please Note that the Front Stabilizer
(#17)
has end caps that
spin for ease of relocating the unit.
Hardware Required
Front Roller
NOTE BEFORE STARTING THE ASSEMBLY PROCESS :
To avoid misalignment due to over-tightening, please do not use a
wrench and use only hand-tightening for now to ensure
easy assembly.
Wrench-tightening should be performed after all parts are assembled
to ensure all nuts, bolts, and parts are tightly secured before use.
#30 Carriage Bolt (M8x70mm)
[4 pieces]
#38 Spring Washer (M8)
[4 pieces]
#43 Cap Nut
[4 pieces]
#39 Arc Washer (M8)
[4 pieces]
