Computer Operation
BRB 3800
Page 1
2
3.
CLOCK:
Display the current time.
4.
ALARM:
The monitor has the alarm function.
5.
SCAN:
Display all function value from SPEED-RPM- DISTANCE-TIME-CALORIE-PULSE.
6.
SPEED:
Display current training speed. Maximum speed is 99.9 MILE/H.
7.
RPM:
Display current rotation per minute.
8.
DIST:
Accumulate the total distance form 0.00 up to 999.9 Mile. Or users can preset the target distance
they want to reach.
9.
TIME:
Accumulate the workout time from 00:00 to 99:59. Or users can preset the target time they want.
10.
CAL:
Accumulate the calories consumption from 0 to 9999. Or users can preset the target Calories they
want to consume.
11.
PULSE:
Display the current heart rate in beats per minute.
12.
T.H.R.:
Users can preset their Target Heart Rate for training.
13.
Body Fat Measurement:
Display body fat ratio, body type and BMI.
14.
Pulse recovery:
Check the condition of pulse recovery when stop exercising.
Operation Instructions:
1. Batteries
Installation
Please install 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
2. The full LCD display will be shown with Bi sound at the same time after batteries installation, then the
wheel size will be shown 2 seconds. After that the LCD will display calendar, time and room
temperature.
3. Calendar/
Clock
Use UP or DOWN key to set the value while the number of year, month, date and time is blinking then
press ENTER key to confirm the setting value.
Press REOVERY and MEAUSRE keys together can enter setting mode of Calendar during stop mode.
Calendar, room temperature and time will show out while stop exercising and without pressing key over
256 seconds, and reset all the function value to be zero.
Alarm
Use UP or DOWN key to set the value while the number of hour and minute for alarm is blinking, press
ENTER key to confirm each setting value. After that press UP or DOWN key to have the alarm signal
on the display then press ENTER key to confirm it. Once the alarm is ringing, press any key to stop it.
4. Preset Dist/ Time/Cal/T.H.R.
Press ENTER key to enter setting mode.
Use UP or DOWN key to set the target value while the number is blinking then press ENTER key to
confirm each value.
a. Dist:
The monitor will count up the distance from 0.0 ~ 999.9 Mile without setting the value.
Users can set the target value from 0.5 to 999.5 Mile then the monitor will count down from the
setting value.
Once reach the setting value, the monitor will alarm then the value will count up from 0.0.
b. Tme:
The monitor will count up the time from 00:00 to 99:59 without setting the value.
Users can set the target value from 1:00 to 99:00 then the monitor will count down form the setting
value.
Once reach the setting value, the monitor will alarm then the value will count up from 00:00.
