manualshive.com logo in svg

Body Champ BCB 810, Owner'S Manual

Share
Download
Body Champ BCB 810 Owner'S Manual Download Page 10

BCB 810 Mid-Width Bench

Assembly Instructions

A s s e m b l y   S t e p   4

Hardware Required

Page 8 

Please note: This

diagram is designed to 

help you easily identify 

the hardware type and 

quantity you will need 

to complete each step.

#24 Hex Bolt (M10x60 mm)

#26 Hex Bolt (M10x50 mm)

[3 Pieces]

#27 Hex Bolt (M10x25 mm)

 [2 Piece]

#28 Hex Bolt (M8x15 mm)

Bolts

Nuts

Washers

#22 Hex Bolt (M10x80 mm)

#29 Lock Nut (M6)

#30 Lock Nut (M10)

[5 Pieces]

#31 Washer (M10)

[8 Pieces]

#32 Washer (M8)

#23 Hex Bolt (M10x85 mm)

A. Slide the 

Glide Carriage (#06)

 onto the 

Lat Tower (#14)

with 

the weight mounting tubes facing the front of the bench along 

with the round slotted triangle bracket facking the top and then 

slide the 

Lat Tower (#14)

 into the 

Lat Tower Base (#13)

.

B. Secure the 

Lat Tower (#14)

 to the 

Lat Tower Base (#13)

 using 

two

Hex Bolts (#26)

, two 

Washers (#31

)

 and two 

Lock Nuts (#30)

.  

Slide this entire assembly into the 

Front Upright (#05)

 and 

secure it using a 

Knob Bolt (#39)

.

C.

D. Secure the 

Lat Tower Cable (#43)

 with the flat

 fixed washer end to the 

Carriage (#06) 

using 

 one 

Hex Bolt (#27) 

, two 

Washers (#31) 

and 

 a 

Lock Nut (#30)

. Please refer to the blown up 

 illustration on the right.     

 

 

E. Secure the

Lat Tower Bar (#15)

 to 

Lat Tower

 

Cable (#43)

 using a 

Hex Bolt (#27), 

two

 

 Washers (#31) 

     

and one

 Lock Nut (#30).

Assemble the pulley before mounting it on the 

Lat Tower (#14).

 

Attach the first 

Pulley Cover (#42)

 to the 

Pulley (#41) 

and align the 

Lat Tower Cable (#43) 

properly so it is 

running through the slot of the 

Pulley Cover (#42)

,

then attach the second 

Pulley Cover (#42)

 to 

the 

Pulley (#41) 

and align the

 Lat Tower 

Cable (#43) 

properly so it is running through 

the slot. At this point be sure to align the pulley 

so that the safety ball on the 

Lat Tower Cable 

(#43)

 is on the inside of the bench before 

inserting it in the 

Lat Tower (#14)

 bracket. 

Now insert a 

Hex Bolt (#26) 

through a 

Washer (#31), Lat Tower (#14) 

bracket, 

the Pulley Assembly from above and 

through the other side of the 

Lat 

Tower (#14) 

bracket. Secure the 

assembly with a 

Washer (#31) 

and

 Lock Nut (#30). 

Summary of Contents for BCB 810

















Reviews:

No comments

Brands by name

Popular brands

Load more brands