Body Champ BCB 3890, Owner'S Manual

Page: 3 / 16

BEFORE ASSEMBLY
Nylon Lock Safety Nuts
A.
It is only necessary to tighten the bolts and nuts to “finger tight” during the
assembly process. This will make it easier to complete certain steps by
allowing more tolerance for all the parts to fit properly.
B.
Do not tighten all the nuts onto the bolts securely until after you have
completed assembly of your product.
C.
Use wrenches, pliers, or ratchet and sockets to tighten the bolts and nuts.
D.
The Nylon Nut should thread onto the Hex Bolt until the end of the Hex Bolt
has broken through the
Nylon
insert inside the
Nut.
Take a few moments to familiarize yourself with the specific parts hardware
included with your product. Make sure all the parts and hardware are included in
the cartons and examine them for any damage that may have occurred in
transport. Some parts may be pre-assembled and pre-installed
Wiring and Loose Components
A.
Check all wiring for rips and tears
B.
Check the frame for any damage
C.
Make sure all the hardware is included
Take a few minutes to familiarize yourself with the parts and hardware included with your product.
IMPORTANT PLEASE NOTE: MANY OF THE PARTS AND HARDWARE LISTED ON THE PARTS
LIST ARE ALREADY PRE-ASSEMBLED OR INSTALLED ON THE
BENCH .
BEFORE ASSEMBLY
Tools required to assemble the machine:
• Two Adjustable Wrenches
• Two Allen Wrenches
BCB3890 Page 2