background image

WARRANTY

Warranty  for the Danish manufactured BODY 

BIKE® Indoor Cycle:

A two-year warranty against manufacturing 

defects, excluding normal wear and tear, is given 

for the flywheel and pulley. A three-year warranty is 

given on the crank and the pedal arms, and a five 

year warranty is given against frame breakage. 

Consumable items (such as the poly V-belt, brake 

pad, handlebar rubber, adjustment handles, saddle 

and pedals, etc.) which are subject to continuous 

wear and tear, are not covered by a warranty.

There is currently no warranty applying to the pedals. 

The warranty only applies to cycles equipped with 

original BODY BIKE® spare parts. All warranties are 

cancelled if the cycle has been modified or in any way 

not used as intended.

In order for the warranty to be sustained, all instructions in 
the respective manuals have to be followed.

This particularly relates to:

• 

Replacement of rubber feet on the bottom frames 
once a year

• 

Replacement of pedals once a year and tightening of 
these

• 

General cleaning of the bikes after use with correct 
materials

• 

Lubrication of the adjustment handles every 3 months

• 

Original spare parts must be used on the bike

Warranty repairs are to be carried out by BODY BIKE In-

ternational A/S in Denmark.

At the expense of BODY BIKE International A/S.

Related freight costs are held by the customer.

Warranty spare parts are shipped ex. works.

PLEASE NOTE

All warranties are cancelled if 
the control box has been disas-
sembled. 

!

07

Summary of Contents for SMART+

































Reviews: