End cap
Brake plate
Bolt 8mm
Figure 12
Figure 13
Unscrew the
bolt
MAINTENANCE
below.
Mount the plastic tube on top of the bolt
from above.
10) Slide on the handlebar until
K
is above
the line. Screw in the bolt.
11) Mount the end cap and the two 4mm bolts.
12) Tighten or loosen the 8 mm bolt to adjust the
smart handle. Make sure that everybody can release
the smart handle. If that is not the case, the smart
handle has been overtightened.
Plastic tube
4mm Bolt
017
