ASSEMBL
Y
9
BODY
BIKE
®
I N DOOR C YC L E
HANDLEBAR
1: Place the handlebar on top
of the front post.
2: Screw an adjustment
handle (size 32mm) clockwise
into the socket from
underneath the post, see
figure 3. Fix the handlebar
completely to the front post
by tightening the adjustment
screw on the right side of the
handlebar.
PEDALS
1: Place the right pedal arm
with the socket pointing
upwards, see figure 6.
2: Put maximum resistance on
Figure 7
Figure 8
Figure 6
the brake, so the pedalarm is
unable to rotate, see figure 7
Please note
- the pedals are marked with
R for Right and L for Left side.
- the pedals should always be
screwed on in the direction of
the handlebar, see figure 8.
- make sure that the hole
in the pedal arm is greased
when mounting the pedal.
- start mounting the pedal by
hand as tools will tighten the
pedal at a wrong angle.
3: After tightening by hand,
use a 15mm pedal wrench to
tighten the pedal completely
(45Nm).
BOTTLE HOLDER
1: Mount the bottle holder at
the top of the handlebar, see
figure 4.
SADDLE
1: Place the saddle in the track
on the seat post.
2: Secure the saddle with the
remaining adjustment handle,
see figure 5.
To fasten the saddle to the
adaptor and adjust the tilt
of the saddle, use a 14 mm
wrench on the bolt marked
with an A on figure 5.
